SPI - 讀寫資料

程式碼

首先，將下面的代碼上傳到 Arduino UNO。

#include
volatile boolean received;
volatile byte receivedData;

ISR (SPI_STC_vect)        //Interrupt routine function 
{
  receivedData = SPDR;   // Get the received data from SPDR register
  received = true;       // Sets received as True 
}

void setup()
{
  Serial.begin(115200);

  pinMode(MISO,OUTPUT);   //Sets MISO as OUTPUT
  SPCR |= _BV(SPE);       //Turn on SPI in Slave Mode
  received = false;
  SPI.attachInterrupt();  //Activate SPI Interrupt
}


void loop()
{ 
  if(received) {                        
    SPDR = receivedData;    // send back the received data, this is not necessary, only for demo purpose
    received = false;
    Serial.println(receivedData, HEX);
  }
}

然後在Ameba板子上把下面的代碼逐行複制粘貼到REPL中，觀察結果。

from machine import SPI
spi = SPI(0) # Only support 2 sets of SPI -- 0 or 1
spi.write(b"123") # Write number 123, and don't care about received data
spi.read(8, 0x42) # Read 8 bytes while writing 0x42 for each byte