AmebaServo Class
AmebaServo Class
Description
A class used for controlling servo motors connected to Ameba boards.
Syntax
class AmebaServo
Members
| Public Constructors | |
| AmebaServo::AmebaServo | Constructs an AmebaServo object. |
| Public Methods | |
| AmebaServo::attach | Attach a PWM pin to control servo. |
| AmebaServo::detach | Detach the servo. |
| AmebaServo::write | Write a value to control servo. The value is between 0 -180 degrees. |
| AmebaServo::writeMicroseconds | Write a value to control servo. The value is between 544 – 2400ms. |
| AmebaServo::read | Read the value from servo and returns current pulse width as an angle between 0 and 180 degrees. |
| AmebaServo::readMicroseconds | Read the value from servo and returns current pulse width in microseconds. |
| AmebaServo::attached | Check if the servo is attached. |
AmebaServo::attach
Description
Attach a PWM pin to control servo on Ameba boards. Minimum and maximum pulse width can be set optionally. By default, the minimum and maximum pulse width are 544ms and 2400ms respectively. The function returns 0 when the execution is completed.
Syntax
uint8_t attach(int pin);
uint8_t attach(int pin, int min, int max);
Parameters
pin: A digital pin that is one of the Ameba boards’ PWM pins.
min: Minimum pulse width to be set for PWM. By default, the min is 544ms.
max: Maximum pulse width to be set for PWM. By default, the max is 2400ms.
Returns
This function returns 0.
Example Code
Example: ServoSweep
(https://github.com/ambiot/amb1_arduino/blob/dev/Arduino_package/hardware/libraries/Analog/examples/ServoSweep/ServoSweep.ino)
The code demonstrates a servo motor sweeping from 0 – 180 – 0 degrees, in 1-degree intervals.
Notes and Warnings
“AmebaServo.h” must be included to use the class function.
AmebaServo::detach
Description
Detach the servo.
Syntax
void detach(void);
Parameters
NA
Returns
NA
Example Code
NA
Notes and Warnings
“AmebaServo.h” must be included to use the class function.
AmebaServo::write
Description
Write an integar value to control servo. The value is between 0 -180 degrees.
Syntax
void write(int value);
Parameters
value: An integer value that should be between 0 -180. If the value is < 0, it will be taken as 0 and if the value >180, it will be taken as 180.
Returns
NA
Example Code
Example: ServoSweep
(https://github.com/ambiot/amb1_arduino/blob/dev/Arduino_package/hardware/libraries/Analog/examples/ServoSweep/ServoSweep.ino)
Notes and Warnings
“AmebaServo.h” must be included to use the class function.
AmebaServo::writeMicroseconds
Description
Write a value to control servo. The value is between 544 – 2400ms that represents pulse width.
Syntax
void writeMicroseconds(int value);
Parameters
value: An integer value that should be between 544 – 2400 as pulse width. If the value is < 544, it will be taken as 544 and if the value > 2400, it will be taken as 2400.
Returns
NA
Example Code
NA
Notes and Warnings
“AmebaServo.h” must be included to use the class function.
AmebaServo::read
Description
The function reads the value from servo and returns current pulse width as an angle between 0 and 180 degrees.
Syntax
int read(void);
Parameters
NA
Returns
This function returns integer value that represent pulse width between 0 – 180 degrees.
Example Code
NA
Notes and Warnings
“AmebaServo.h” must be included to use the class function.
AmebaServo::readMicroseconds
Description
The function reads and returns the pulse width of the current servo in microseconds.
Syntax
int readMicroseconds(void);
Parameters
NA
Returns
This function returns integer value that represent pulse width in microseconds.
Example Code
NA
Notes and Warnings
“AmebaServo.h” must be included to use the class function.
AmebaServo::attached
Description
Check if the servo is attached.
Syntax
bool attached(void);
Parameters
NA
Returns
This function returns true if the servo is attached, else it returns false.
Example Code
Example: ServoSweep
(https://github.com/ambiot/amb1_arduino/blob/dev/Arduino_package/hardware/libraries/Analog/examples/ServoSweep/ServoSweep.ino)
Notes and Warnings
“AmebaServo.h” must be included to use the class function.
